5.

The first page of the Mail and Discussions Group Setup will be displayed as shown in Figure 24. Enter your name, your E-mail address and the domain name of your outgoing E-mail server. Click "Next".

Figure 2-4
Figure 2-4

Figure 2-5
Figure 2-5

6.

When the second page of the Mail and Discussion Group Setup appears, as shown in Figure 2-5, enter your user name for your incoming mail server. This is usually the same as your regular login name. Fill in the domain name of your incoming mail server. This will typically be the same as your outgoing mail server. Select the proper option button for either a POP3 protocol or an IMAP4 protocol. If you are using an ISP, this will usually be POP3. Click "Next".

7.

The final page of the Mail and Discussion Group Setup will be displayed, as in Figure 2-6. If you have a Discussion Group server, you may enter the address now. If you do not have one, or don't know what it is, just leave the field blank. Click "Finish".

Figure 2-6
Figure 2-6

Remember, all the above information should be available from your network administrator or your Internet Service Provider.

By now, Netscape Navigator should be displayed on your screen.


Previous Page Table Of Contents Next Page