Demonstrate the lockout and tag-out procedure

• Shut down the equipment.
• Disconnect the power supply or have it disconnected.
• Note clearly on a plastic tag-out tag the problem with the equipment.
• Hang a ‘lock-out’ tag to the ignition switch and ensure that it is visible.
• Advise the supervisor ASAP of the problem.
• Follow the instructions of the supervisor to either remove the equipment or leave it as is.
• Secure the broken equipment with a padlock.
• Retain the key until the machinery is repaired.

100% of assessment criteria

Performs pre-operational inspection.

Pre-Operational Inspection

• Check motor oil levels.
• Check transmission, hydraulic and coolant levels
• Do a walk around and ensure that there are no leakages.
• Check to ensure that the parking brake has been applied.
• Check the equipment’s tires.
• Start the machine and recheck to ensure that all fluid levels are appropriate.
• Ensure that the gauges are working properly.
• Test gauges if needed.
• Do a sufficient warm-up prior to engaging the equipment.

100% of assessment criteria